Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E
4.0 (93 items)
Limited Time SaleUS$41.97 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 210037114 | Release Date | 2026/04/02 | List Price | US$27.98 | Model Number | 210037114 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank ( Visit our store for a wide variety of HP ratings and Multiple Inlet / Outlet configurations ) Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions. 30 scfm Rating - comes complete with hand unloader and muffler/silencer - Inlet / Outlet are in-line with each other Piloted discharge check valves combine a pilot valve, a discharge valve, and a check valve into one system used to run an air compressor at a constant speed. They are used on both gas engine and electric motor compressors. The top inlet portion of the valve will connect to your main airline from your pump. The bottom outlet will connect to your air receiver tank. The 1/8" Male NPT Connection on the Throttle control cable will connect to the throttle control port on the unloader. The Z bend tip of the throttle control cable will connect to the throttle arm on your engine. Muffler is included to reduce noise.
- Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA
- Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors
- 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down
- 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank
- 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions.
| UPC | 724453990281 |
|---|---|
| Size | 25 cm |
| Brand Name | Ei |
| Unit Count | 1.0 Count |
| Valve Type | Piloted Discharge Check Valve |
| Thread Size | 3/8 |
| Thread Type | Male Pipe Thread |
| Manufacturer | Conrador |
| Model Number | NG42 110-140 |
| Material Type | Metal |
| Connector Type | Flare, Pipe Thread |
| Exterior Finish | Stainless Steel |
| Item Dimensions | 5.51 x 6.69 x 9.84 inches |
| Number of Ports | 3 |
| Maximum Pressure | 140 Pound per Square Inch |
| Number of Pieces | 1 |
| Specification Met | ASME, ANSI, OSHA |
| Included Components | receiver |
| Inlet Connection Type | Flare |
| Outlet Connection Size | 9.53 Millimeters |
| Outlet Connection Type | Flare |
Bestseller ranking
Air Compressor Replacement Parts
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form