Arctic Freezer i13 X Compact Heatsink & Fan, Intel Sockets, 92mm PWM Fan, Fluid Dynamic Bearing, 150W TDP

£23.49 incl VAT

Out of stock


Compact Intel CPU Cooler

  • Small Footprint For Optimal Compatibillity  
  • Pre-Applied MX-2 Thermal Paste 
  • Longer Lifespan Thanks to its Low Motor Temperature    
  • Offset Heat Pipes Enable Optimal Heat Dissipation    
  • P-Fan For Increased Performance        
  • Fluid Dynamic Bearing        
  • Direct Touch Heat Pipes
  • More Cooling Capacity With Freezer I13 
  • More Efficient And Whisper Quiet    
  • Multilingual Manuals 
 

Small Footprint For Optimal Compatibillity    

 
The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

 

Pre-Applied MX-2 Thermal Paste    
Pre-applied, high-performing  MX-2 thermal paste ensures quick and clean assembly.   

 

Longer Lifespan Thanks to its Low Motor Temperature    
The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing  ARCTIC to grant a 6-year warranty period for the Freezer i13 X.

 

Offset Heat Pipes Enable Optimal Heat Dissipation    
The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.    
 

 

P-Fan For Increased Performance        
Inspired by the P-series, the Freezer i13 X’s fan benefits from all of the advantages of P-fans:
 – High static pressure for increased cooling performance
 – Broad RPM range
 – Lower power consumption
 – Less vibration
 – PWM for synchronous fan control

 

Fluid Dynamic Bearing        
Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.   

 

Direct Touch Heat Pipes
The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.

 

More Cooling Capacity With Freezer I13 X
The ARCTIC Freezer i13 X sets new standards in cooling.
Proven to outperform its predecessor in cooling capacity.

 

More Efficient And Whisper Quiet    
In addition to operating more quietly, even at maximum speed, the Freezer i13 X’s built-in fan motor is also much more efficient.
The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer i13 X to run at a whisper-quiet 0.3 sone when at maximum speed.

 

Multilingual Manuals 
ARCTIC installation manuals come in a variety of languages. They are regularly updated and easy to access from anywhere in the world.
 

Based on 0 reviews

0.00 Overall
0%
0%
0%
0%
0%
Be the first to review “Arctic Freezer i13 X Compact Heatsink & Fan, Intel Sockets, 92mm PWM Fan, Fluid Dynamic Bearing, 150W TDP”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

SKU: SP-HEATARCFRI13X Category:
Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Great to see you here !

A password will be sent to your email address.

Please select all the ways you would like to hear from us

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Already got an account?

Quickview

Close

Categories